uxcell 6007-2RS Deep Groove Ball Bearings Z2 35mm X 62mm X 14mm Double Shielded Carbon Steel 4pcs

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for hardness.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selecting Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: 6007-2RSSeal Type: Double SealedInner Race/Outer Race Material: Carbon SteelCage Material: Stamping SteelInner Diameter (d): 35mmOuter Diameter (D): 62mmThickness (B): 14mmDynamic Load Rating (Cr): 15900NStatic Load Rating (Cor): 10300NAccuracy Class: P0 (ABEC-1)Noise Level: Z2Number of Pack: 4 Pcs

• 6007-2RS (I.D.=35mm, O.D.=62mm, Thickness=14mm)
• 6007 2RS bearings are sealed on BOTH SIDES to keep lubricant in
• Made from Carbon Steel, features with good anti-rust and corrosion resistance
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Static load rating of 10300 newtons and dynamic load rating of 15900 newtons