ChillWaves Brass Pipe Fitting, Tee 1/8" x 1/8" x 1/8" NPT Female Thread Adapter(6-PACK)

Pipe fittings are the components in the pipeline system that play the roles of connection, control, reversal, diversion, sealing, and support.Note that the brass Tee are US NPT standard threads with a 60 degree taper.Product introduction：1. It is used to connect male threaded pipe fittings of the same diameters or to extend the length of pipes. NPT female and male threads are hard connections, which typically require sealing.2. It is suitable for gases, water, oil and non-corrosive liquids. Widely used in grease, fuel, refrigeration, water, oil and gas and hydraulic systems.3. Thicker wall design for longer service life, three openings for connecting with branch fittings, and can be connected to a pressure gauge to measure the pressure of the fluid passing through.4. The threads are smooth and clear, easy to install, and a sufficient number of threads are designed to ensure that the joint is stronger after tightening and prevent loosening. To ensure a seal, Teflon tape can be used, just wrap a few turns around the threads. 5. When purchasing pipe fittings, consider the application as this will affect the material type, shape, size and desired durability. Fittings are threaded or unthreaded and come in many shapes, styles, sizes and schedules (wall thickness)PACKAGE INCLUDED:6 x 1/8" x 1/8" x 1/8" NPT Female Tee Fitting1 x Teflon tape

• SIZE - 1/8" x 1/8" x 1/8" NPT Female Tee Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
• MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
• USE - It is used to connect male threaded pipe fittings of the same diameters or to extend the length of pipes.It is a fitting specially used in pipeline connection engineering.It is suitable for use with gases, water, oil, and non-corrosive liquids with in the specified pressure and temperature range.
• WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65°F to +250°F (-53°C to +121°C)
• NOTE - NPT is a tapered pipe thread with a 60°taper and generally cannot be screwed to the end.